Stick On Wheel Weights
stick on wheel weights are a type of balancing weight for vehicle wheels which is an effective and environmentally friendly way to quickly balance wheels using as little weight as possible.
Unlike traditional clip-on weights that attach to the rim of the wheel, stick-on weights adhere directly to the surface of the wheel. All of the tape weights we offer come with extremely strong tape that sticks to the rim better, which results in a better-balanced wheel.
Stick-on wheel weights are often used on aluminum wheels or wheels with a clear coating that may be damaged by clip-on weights. They are available in a variety of sizes and weights to balance different types of wheels and tires.
Unlike traditional clip-on weights that attach to the rim of the wheel, stick-on weights adhere directly to the surface of the wheel. All of the tape weights we offer come with extremely strong tape that sticks to the rim better, which results in a better-balanced wheel.
Stick-on wheel weights are often used on aluminum wheels or wheels with a clear coating that may be damaged by clip-on weights. They are available in a variety of sizes and weights to balance different types of wheels and tires.
Features
Steel wheel weight
Lead-free
Low Profile Design
Segmented adhesive tape wheel weights
No Cutting, no pre-contouring, and no waste
Each segment is stamped with the actual weight in grams
1/4 oz segments
Easy Installation
No Fasteners Necessary
No Tools Required
How to use adhesive weights
1. PRE-TREATING THE RIM
Clean the area where the wheel weight is to be applied using a rim/wheel cleaner. To do so, spray the area thoroughly and then wipe with a clean soft cloth.
Please note:
A minimum of 15 °C is required in terms of both the room temperature and the rim temperature.
2. PRE-BENDING THE WEIGHTS
Separate the correct gram (as calculated) from the bar. Mold the shape of the weight to match the rim radius (with protective film).
Please note: You need to bend the weights gradually, otherwise they will break apart at the joints. You should bend the weight to a little more than the rim's radius.
3. REMOVAL OF THE PROTECTIVE FILM
Remove the protective film and avoid touching the exposed adhesive.
4. STICKING THE WEIGHT ON
Attach the weight to the calculated point on the rim, making sure that the weight is distributed evenly on either side and the weight is parallel with the edge of the rim. Using your fingers, apply uniform pressure throughout the surface (do not use a hammer).
Product parameters
| Part No. | Description | Box Qty | Case Qty |
| F160 | Height 3mm(include tape 4.0mm), Width 19mm, Length 138mm, 60 grams steel adhesive weight, made up of 4*5 grams and 4*10 grams segments. Zinc plated and epoxy coated is available. | 100 | 4 |
| F170 | Height 3mm(include tape 4.0mm), Width 19mm, Length 137mm, 60 grams steel adhesive weight, made up of 12*5 grams segments. Zinc plated and epoxy coated is available. | 50 | 8 |
| F180 | Height 3mm(include tape 4.0mm), Width 19mm, Length 194mm, The steel adhesive strip is individually separable and made up of 12*1/4oz segments. Zinc plated and epoxy coated is available. | 52 | 4 |
| F190 | Height 3.8mm(include tape 4.8mm), Width 19mm, Length 150mm, The steel adhesive strip is individually separable and made up of 6*1/2oz segments. Zinc plated and epoxy coated is available. | 24 | 8 |
Check Out The Newest Product From The Original Super Glue.
Get Inquiry