This cyanoacrylate superglue is also called wood glue, cyanoacrylate adhesive, crazy glue, CA glue; With instant and permanent repair properties, it is the preferred adhesive for various home and office projects.
Small pottle super glue 5g, medium bottle super glue 10g, bulk bottle super glue 20g for your choice.
5g 10g 20g
Be sure the surfaces to be glued are clean and dry.
Apply one drop for each 3c㎡ area. Apply with extreme care.
Never spread with fingers.
Apply to only one for the surface. Quickly place two surfaces
together with slight finger pressure. Bond completed in seconds.
Note: For best results, be sure to choose brand suppliers with quality assurance;
Pierce nozzle by pin
Use nozzle for application
-65°F to 180°F (-54 to 82°C)
Vinegar can remove unwanted hardened loctite super glue from plastic，Soak the area using only white vinegar, then remove the loctite glue with a credit card, spatula,cotton swab or similar edge.
If you choose to use household super glue or even over-the-counter adhesive products, do so with caution and full understanding of the risks, including infection and scarring.
Soak the skin in glue remover to loosen the glue, then simply attempt to peel the glue off.
Soak the skin in warm white vinegar and baking soda water,then simply attempt to peel the glue off.
Lemon juice can be used as a substitute to soap if you have sensitive skin.
It is sterile, fast drying, waterproof, instead of sutures.
Use professional high-efficiency glue remover to remove glue from wood
Preparation tools: high-efficiency glue remover, paper towels, or cotton swabs.
Because the high-efficiency glue remover is insoluble in water, the wood is dried before use, and then the high-efficiency glue remover is applied.
After 15S, the glue softens, and then wipe off the glue with a paper towel or cotton swab.
Drop the high-efficiency glue remover again and carefully wipe off the remaining glue.
The strongest glue for metal is Hopson epoxy adhesive glue, Hopson epoxy glue is an incredibly strong two part adhesive, the two parts are mixed according to a fixed ratio, and it takes only 5 minutes to cure. This 2 part epoxy adhesive is an ideal alternative to welding, it's the strongest solution for bonding most metals, including iron, magnesium, zinc, steel, aluminum, brass, copper, and pewter.