All purpose school glue sticks are strong, fast-bonding, and no mess. They can be used in craft projects, such as paper, wood, fabric, and board.
Options Available
8g
Ensure surface of the bonded object is clean, dry, free of dust and oil stains.
Remove cap, turn base until the glue stick extends slightly
Apply with firm strokes
Turn base to retract glue stick
Always close the cap after use
Washeble
Non-toxic
Acid-free
Dries fast
Long-lasting viscosity
Small size, easy to carry
Doesn't wrinkle paper, smooth application
Uses
Glue sticks are suitable for all kinds of paper, invoices, envelopes, and cards. It is also a good helper for manual DIY.
PVA glue (Polyvinyl alcohol) | PVP glue (polyvinyl pyrrolidone) | ACR glue (Acrylics) |
Formaldehyde must be added during the production of PVA glue | No formaldehyde, higher viscosity than PVA | No formaldehyde, higher viscosity than PVP |
White, black, purple, yellow, blue | White, black, purple, yellow, blue | Translucent |
Slow-drying | Fast-drying | |
Shelf life:18 months | Shelf life:24 months | Shelf life:24 months |
Affordable choice | Quality upgrade choice | |
Smooth application, easy to use |
Hopson glue stick is PVP-based, Elmer's glue is PVA-based. PVP adhesive is safe and environmentally friendly, with good slippage and low application resistance. PVA adhesive, on the other hand, does not.
Elmer's glue will turn yellow and may decompose over time. Hopson glue stick does not.
The main ingredient of Hopson glue sticks is polyvinyl pyrrolidone (Chemical formula (C6H9NO)n), CAS: 9003-39-8, environmental protection, non-toxic
Safety description(S24/25):Avoid contact with skin and eyes
Smell
The smaller the odor, the better. It contains other odors, whether it is a slight odor or other pungent odors, it is not a good solid glue.
Silky and unbreakable
When you use your index finger and thumb to pull up the colloid, the silk is dense and not easy to break
One minute quick drying standard
The time to fully adhere to is about 1 minute (depending on the temperature and humidity, the time may vary slightly)
For the strongest glue to use on harder plastics try Hopson two-part cyanoacrylate adhesive,It's water-resistant, fast-drying, solidify within a few seconds after use and dries clear.
This epoxy resin cyanoacrylate adhesive forms a very dense network during heat curing, forming an incredibly strong bond with almost any object, making Hopson Glue your solution for almost any project or repair.
Check Out The Newest Product From The Original Super Glue.
Get Inquiry